The processing procedure of translucent jade:
General modern woodworking machinery can be used. Such as circular saw, jigsaw, trimming machine, hand drill, grinder, polishing machine, etc.
The artificial stone slab can be cut into any shape you need at will.
When butting, straighten the two plates to be butted with a trimming machine. When the two boards are joined together, it feels seamless. Wipe it dry with a clean cloth and smooth it. Clamp it with a clamp to achieve seamless splicing. After about 40-90 minutes, it will be loosened and processed (after the glue is completely cured)
When the board is spliced, rub the splicing place with rough sandpaper once to increase the adhesion. The other piece of splicing should also be straightened with a trimming machine. Put the two pieces together to feel seamless, and wipe it with a clean cloth. Apply special glue and clamp with clamps. Can be spliced into any shape.
Use a straightening machine (engraving machine) to make the spliced board into the shape you need.
For bending, soak in boiling water for about 3 minutes, and take it out in time for bending.
Sand the finished side with coarse sandpaper to fine sandpaper. The finer the sanding, the smoother it will be. Use water to sand with fine sand.
Coat the polished side with polishing wax and polish with a polishing machine. All processing techniques are completed.